1. High Strength & Good Stability
Galvanized reinforcing mesh has high strength, high plasticity, and impact absorption capacity. The tensile strength of raw materials is up from 1200 MPa to 1580 MPa. So the reinforced mesh can resist external forces caused by natural disasters, such as strong winds, and earthquakes. When the building deforms, the mesh makes the building not collapse or crack soon. That’s why it is widely used in the construction industry.
2. Excellent Corrosion Resistance
Through hot-dip galvanizing or electro-galvanizing, there is a zinc layer that protects the steel surface from corrosion and rust. The excellent corrosion resistance will prolong its service life.
3. Improve Project Quality
Our concrete reinforcing mesh is produced by a fully automatic intelligent production line. From the size and specification to the quality of the mesh is strictly controlled. The mesh produced by Wanzhi Steel has the characteristics of large steel degree, high strength of welded joints, good elasticity, uniform, and accurate mesh spacing, and good anti-cracking performance. The quality of the mesh is good, which also means the quality of the project will be greatly improved.
4. Easy to Install
Galvanised reinforcing mesh is light in weight, and it is easy to put in the desired position, which makes it easy and quick to install. So using welded reinforced mesh will shorten the construction period (up to 50% to 70%) to save your cost largely.
5. Cost-Effective Solution
Reinforced mesh consumes 30% fewer steel bars during the production process. Besides, due to its great anti-corrosion properties, it can be used in various applications including outdoor environments for a long time. The long service life also makes it cost-effective. So the low-cost mesh is very suitable for large concrete engineering.
Opening | Wire Diameter | ||
Inch | mm | BWG | mm |
1″ × 1″ | 25 mm x 25 mm | 14# – 11# | 2.0 mm – 3 mm |
2″ × 1″ | 50 mm x 25 mm | 14# – 8# | 2.0 mm – 4 mm |
2″ × 2″ | 50 mm x 50 mm | 14# – 8# | 2.0 mm – 4 mm |
3″ × 2″ | 75 mm x 50 mm | 14# – 6# | 2.0 mm – 5 mm |
3″ × 3″ | 75 mm x 75 mm | 14# – 6# | 2.0 mm – 5 mm |
4″ × 2″ | 100 mm x 50 mm | 14# – 4# | 2.0 mm – 6 mm |
4″ × 4″ | 100 mm x 100 mm | 14# – 4# | 2.0 mm – 6 mm |
5″ × 5″ | 125 mm x 125 mm | 14# – 4# | 2.0 mm – 6 mm |
6″ × 6″ | 150 mm x 150 mm | 14# – 4# | 2.0 mm – 6 mm |