1060 Aluminum Sheet Feature
1060 aluminum sheet Has good elongation and tensile strength, can satisfy completely the requirements of conventional processing (stamping, stretch) high formability.
For industrial pure aluminum, high plasticity, corrosion resistance, electrical conductivity, and thermal conductivity, but strength is low, heat treatment can not be improved machinability is bad; Gas welding, hydrogen welding, and resistance welding are not easy to brazing; Under various pressure processing and extension, bending.
1060 Aluminum Sheet Applications
1060 aluminum sheet is widely used in signs, billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, making car heat shield, chemical and marine equipment, etc.
1060 Aluminum Sheet Chemical Composition
Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
Content (max) | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.15 | Remain |
Physical Properties Of 1060 Aluminum Plate
Alloy Temper | Specified | Tensile | Yield | Elongation(%) |
Thickness(in.) | strength(ksi) | strength(ksi) | ||
1060-O(annealed) | 0.006-0.019 | 8.0-14.0 | 2.5 | Min15 |
0.020-0.050 | Min22 | |||
0.051-3.000 | Min25 | |||
1060-H12/1060-H22 | 0.017-0.050 | 11.0-16.0 | 9 | Min6 |
0.051-2.000 | Min12 | |||
1060-H14/1060-H24 | 0.006-0.019 | 12.0-17.0 | 10 | Min1 |
0.020-0.050 | Min5 | |||
0.051-1.000 | Min10 | |||
1060-H16/1060-H26 | 0.006-0.019 | 14.0-19.0 | 11 | Min1 |
0.020-0.050 | Min4 | |||
0.051-0.162 | Min5 | |||
1060-H18/1060-H28 | 0.006-0.019 | Min16.0 | Min12.0 | Min1 |
0.020-0.050 | Min3 | |||
0.051-0.128 | Min4 | |||
1060-H112 | 0.250-0.499 | Min11.0 | Min7.0 | Min10 |
0.500-1.000 | Min10.0 | Min5.0 | Min20 | |
1.001-3.000 | Min9.0 | Min4.0 | Min25 |
6063 aluminum sheet suppliers | aluminum sheet 5052 h32 |
6082 aluminum sheet | aluminum sheet 6061 |
48 x 48 aluminum sheet | aluminum sheet 5052 h32 |
24 x 36 aluminum sheet | aluminum sheet 6061 |
3/16 4x8 aluminum sheet | aluminum sheet alloys |
3/8 aluminum sheet | aluminum sheet buy |
3004 aluminum sheet | aluminum sheet corrugated |
3mm aluminum sheet | aluminum sheet diamond plate |