EN 1.0114 Material (S235J0 Steel)
The S235J0 steel (1.0114 material) is an unalloyed carbon steel steel grade according to EN 10025-2.
Steel S235J0 meaning
“S” stands for structural steel;
“235” means the minimum yield strength (MPa) for the steel thickness ≤ 16 mm;
“J0” refers to the impact energy 27 J at 0 ° C.
Material S235J0 Datasheet
The following tables and lists show the steel S235J0 datasheet and the technical data, including chemical composition, mechanical properties and physical properties etc. All data sheet of DIN EN 10025-2 is the same as BS EN 10025-2 and other EU member states.
The delivery condition of S235JO steel plate are:Normalizing, annealing,tempering,TMCP,PWHT, impact test,Q&T. S235JO steel plate/pipes total alloy content usually is not more then 3%.Except for Si and Mn, there is V,Ti,Nb,Al,Cr,Ni,Re,N and so on. S235JO steel plate/pipes has very wide use.
Chemical composition % MAX | |||||||
THICKNESS(MM) | C | Mn | Si | P | S | N | Cu |
≦40 | 0.17 | 1.4 | ~ | 0.03 | 0.03 | 0.012 | 0.55 |
>40 | 0.17 |
Mechanical properties MIN | |||
| Yield Strength MPa | Tensile Strength MPa | Elongation in 2 in. % |
≦16 | 235 | 360-510 | 17 |
>16, ≦100 | 225 | ||
>100 | 175 | 340-500 |
European Union | US | ISO | Japan | China | India | ||||||
Standard | Steel grade (Steel number) | Standard | Steel grade | Standard | grade | Standard | grade | Standard | grade | Standard | grade |
EN 10025-2 | S235J0 (1.0114) | ASTM A36; | A36; | ISO 630-2 | S235C | JIS G3106 | SM400A, | GB/T 700 | Q235C, Q235D | IS 2062 | E250 |
carbon steel tread plate | 1010 carbon steel plate |
1 4 carbon steel plate | 1015 carbon steel plate |
1 8 carbon steel plate | 1018 carbon steel plate |
1/2 carbon steel plate | 1020 carbon steel 1 8 plate |
1/4 inch carbon steel plate | 1020 carbon steel plate |
1095 carbon steel plate | 1025 carbon steel plate |
3 16 carbon steel plate | 1030 carbon steel plate |
3 8 carbon steel plate | 1035 carbon steel plate |