t1 steel plate suppliers advise these plates to be used in applications that are prone to wear and impact. ASTM a514 grade b plate is treated with heat as it alters the grain structure of the material which in turn improves the toughness, strength, and hardness of these ASTM a514 grade q plates. They are available in 8 subgrades grade B, S, H, Q, E, F, A, and P. ASTM A514 Alloy Steel Plate is used in heavy load machines and cranes and are available in heavy plate thickness. ASTM a514 quenched & tempered steel plate can be galvanized to slow down the corrosion. It also assists the ASTM a514 high-strength steel plate to achieve longer life in conditions with harsh chemicals.
Each of the grades of ASTM a514 weldable steel plate has different chemical requirements but inherits the same mechanical properties. The maxim thickness of the Astm a514 grade e plate should not be more than 150 mm. ASTM a514 grade f plate can be heat treated at not less than 900 degrees C to maintain the tensile and hardness requirement. ASTM a514 grade h plate can then be quenched with water or oil. These ASTM a514 grade s plate can be tempered at not less than 620 degrees C.
A514 material is known for its high yield strength, weldability, and toughness even at low temperatures. A514 Steel Plates are made up of this material. Astm A514 Plate Suppliers recommend this as it is a low carbon quenched and tempered alloy steel. It is a high performing material at a low cost for structural use and to be used in high wear machine applications. a514 t1 also provides resistance to corrosion, and impact abrasion. ASTM a514 grades are usually used in earth moving equipment frames, truck frames and bodies, building and bridge frames, and so on.
| A514 Gr B | A514 Gr A | A514 Gr E | A514 Gr C | A514 Gr H | A514 Gr F | A514 Gr J | A514 Gr M | A514 Gr K | A514 Gr P | A514 Gr R | A514 Gr Q | A514 Gr S | A514 Gr T |
C | 0.012-0.021 | 0.015-0.021 | 0.012-0.020 | 0.010-0.020 | 0.012-0.021 | 0.010-0.020 | 0.012-0.021 | 0.012-0.021 | 0.010-0.020 | 0.012-0.021 | 0.015-0.020 | 0.014-0.021 | 0.011-0.021 | 0.008-0.014 |
M | 0.070-1.000 | 0.080-1.010 | 0.040-0.070 | 1.010-1.050 | 0.095-1.030 | 0.060-1.000 | 0.045-0.070 | 0.045-0.070 | 1.010-1.050 | 0.045-0.070 | 0.085-1.015 | 0.095-1.030 | 1.010-1.050 | 1.020-1.050 |
P | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 |
S | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0035 | 0.0010 |
Si | 0.020-0.035 | 0.040-0.080 | 0.020-0.040 | 0.015-0.030 | 0.020-0.035 | 0.015-0.035 | 0.020-0.035 | 0.020-0.035 | 0.015 | 0.020-0.035 | 0.020-0.035 | 0.015-0.035 | 0.015-0.045 | 0.040-0.060 |
Ni | - | - | - | - | 0.030-0.070 | 0.070-1.000 | - | 1.020-1.050 | - | 1.020-1.050 | 0.090-1.010 | 1.020-1.050 | - | - |
Cr | 0.040-0.065 | 0.050-0.080 | 1.040-2.000 | - | 0.040-0.065 | 0.040-0.065 | - | - | - | 0.085-1.020 | 0.035-0.065 | 1.000-1.050 | - | - |
Mo | 0.015-0.025 | 0.018-0.028 | 0.040-0.060 | 0.015-0.030 | 0.020-0.030 | 0.040-0.060 | 0.050-0.065 | 0.045-0.060 | 0.045-0.060 | 0.045-0.060 | 0.015-0.025 | 0.045-0.060 | 0.010-0.060 | 0.045-0.060 |
V | 0.003-0.008 | - | - | - | 0.003-0.008 | 0.003-0.008 | - | - | - | - | 0.003-0.008 | 0.003-0.008 | 0.006 | 0.003-0.008 |
Ti | 0.001-0.003 | - | 0.001-0.010 | - | - | - | - | - | - | - | - | - | - | - |
Z | 0.005-0.015 | - | - | - | - | - | - | - | - | - | - | - | - | |
Cu | - | - | 0.015-0.050 | - | - | 0.015-0.050 | - | - | - | - | - | - | - | - |
B | 0.0001-0.0005 | 0.00025 | 0.0001-0.0005 | 0.0001-0.0005 | 0.0001-0.0005 | 0.0001-0.0005 | 0.0001-0.0005 | 0.0001-0.0005 | 0.0001-0.0005 | 0.0001-0.0005 | - | - | 0.0001-0.0005 | 0.0001-0.0005 |
Nb | - | - | - | - | - | - | - | - | - | - | - | - | 0.006 | - |
astm a283 gr.c carbon steel plate | astm sa36 carbon steel plate |
astm a283 grade c mild carbon steel plate | best carbon steel plate |
astm a50 carbon steel plate | best hot rolled carbon steel plate |
astm a53 carbon steel plate | best mild carbon steel plate |
astm a537 class 1 carbon steel plates | boiler plate carbon steel |
astm a537 class 1 carbon steel plates in india | boiler quality carbon steel plates |
astm carbon steel plate grades | buy carbon steel plate |
astm low temperature carbon steel plate | buy carbon steel plate flanges |