Titanium sheet is produced on the basis of titanium plate with further cold rolling; the production process of titanium sheet is more complicated. The deformation control is more strictly in the process of rolling.
Application
1, Used in the production of heat exchanger, tower, reaction kettle.
2, Used in the production of metal composite material.
3, Used in electrolytic copper industry.
4, Used to produce titanium mesh.
Material Grade
UNS No. | UNS No. | ||||
Gr1 | UNS R50250 | CP-Ti | Gr11 | UNS R52250 | Ti-0.15Pd |
Gr2 | UNS R50400 | CP-Ti | Gr12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
Gr4 | UNS R50700 | CP-Ti | Gr16 | UNS R52402 | Ti-0.05Pd |
Gr7 | UNS R52400 | Ti-0.20Pd | Gr23 | UNS R56407 | Ti-6Al-4V ELI |
Gr9 | UNS R56320 | Ti-3Al-2.5V |
Specification
Grade | Status | Specification | ||
Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11, Gr12,Gr16,Gr23 | Hot Rolled(R) Cold Rolled(Y) Annealed(M) Solution treatment(ST) | Thickness(mm) | Width(mm) | Length(mm) |
0.3~5.0 | 400~3000 | 1000~6000 |
Chemical composition
Grade | Chemical composition, weight percent (%) | ||||||||||||
C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Other Elements Max. each | Other Elements Max. total | |
Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5~6.75 | 3.5~4.5 | — | — | — | — | 0.1 | 0.4 |
Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | 0.12~0.25 | — | 0.12~0.25 | — | 0.1 | 0.4 |
Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5~3.5 | 2.0~3.0 | — | — | — | — | 0.1 | 0.4 |
Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12~0.25 | — | — | — | 0.1 | 0.4 |
Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6~0.9 | 0.2~0.4 | 0.1 | 0.4 |
Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04~0.08 | — | — | — | 0.1 | 0.4 |
Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5~6.5 | 3.5~4.5 | — | — | — | — | 0.1 | 0.1 |
Physical properties
Grade | Physical properties | |||||
Tensile strength Min | Yield strength Min (0.2%,offset) | Elongation in 4D Min (%) | Reduction of Area Min (%) | |||
ksi | MPa | ksi | MPa | |||
Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
Tolerance (mm)
Thickness | Width tolerance | |
400~1000 | >1000 | |
0.3~0.5 | ±0.05 | ±0.05 |
0.5~0.8 | ±0.07 | ±0.07 |
0.8~1.1 | ±0.09 | ±0.09 |
1.1~1.5 | ±0.11 | ±0.13 |
1.5~2.0 | ±0.15 | ±0.16 |
2.0~3.0 | ±0.18 | ±0.20 |
3.0~4.0 | ±0.22 | ±0.22 |
4.0~5.0 | ±0.35 | ±0.35 |
titanium alloy sheet | titanium alloy sheet |
titanium b sheet | titanium b sheet |
titanium d sheet | titanium d sheet |
titanium head sheet | titanium head sheet |
titanium rectangular sheet | titanium rectangular sheet |
titanium round sheet | titanium round sheet |
titanium sheet manufacturers | titanium sheet manufacturers |
titanium sheet suppliers | titanium sheet suppliers |